The FPD is a highly sensitive and selective detector for bothsulfur and phosphorus compounds. It is especially suitable forenvironmental monitoring of H2S and sulfur gases ingeneral and for organophosphorus compounds present at trace levelsin pesticide analysis. Alkyl tin compounds can also be analyzed bychanging the filter assembly. The sulfur filter is shipped standard. The FPD mounts in either the front or rear detector position. This allows many detector combinations, such as FPD/FPD, FPD/TCD,and FPD/ELCD.The AutoSystem also includes a linearizer function for thesulfur mode, and convenient control of the photomultiplier tube from the keyboard.The FPD is capillary-column compatible. The detector will accept columns of 0.530 mm i.d. or less. The standard jet shipped with theFPD does not have a glass-lined tail pipe. If an all-glass systemis required and glass packed columns will be used, then aglass-lined tail pipe should be ordered (N6100264). As a reminder, use of packed 1/4 in. columns requires a 1/8 in. to 1/4 in.adapter.FPD Add-on Kit for AutoSystem Series includes detector, heater, sensor, heater block, hydrogen needle valve, air pressureregulator, and sulfur photomultiplier filter. Requires but does notinclude FPD amplifier (N6120095). Firmware revision 1.6 or greater required. Firmware must be PerkinElmer Service installed. AutoSystem operator's manual (09938559) revision E or higherrequired.
|Product Group||Add-on Kit|