Gas Chromatography Mass Spectrometry (GC/MS) Instruments|PerkinElmer

Quick View

Torion T-9 Portable GC/MS

We now offer portable GC/MS instrumentation for analyses in the field. This is ideal for rapid screening of chemicals, including environmental volatiles and semivolatiles (VOCs/SVOCs), explosives, chemical warfare agents, hazardous substances, and for use in food safety and industrial applications.

Quick View

Phthalates Determination by GC/MS

PhthalatesGCMS

PerkinElmer offers a complete solution for this application, featuring a Clarus® SQ 8 GC/MS, delivering robust methodology and accurate, reliable results with detection at levels considerably lower than the regulations.

Quick View

Arson Analysis by Automated Thermal Desorption-GC/MS

ARSONANALYSIS

Fire investigation involves many different types of analyses - from crime-scene investigation through analytical chemistry.

Quick View

11 mm, Hand Crimper Tool

00090699

Hand Crimper for manual crimping of 11mm aluminum crimp seals to vials. Crimp capping is still a preferred method by some laboratories to ensure sample integrity, particularly those containing volatile compounds.

List Price : 399.00 EUR

Quick View

1/16 in., 10-Port External Sample Injector

N9302816

This external sample injector features 6 ports and has a fitting of 1/16 inches. Maximum temperature of 350°. This switching valve allows employment of different desired mobile phases by periodically injecting into the carrier gas stream of the chromatograph.

List Price : 1076.00 EUR

Quick View

GC Capillary Cutting Tool (1/pack)

N6107245

Use our capillary column cutting tool to ensure a perfect cut of your GC column, first time, every time. The rotating diamond blade with a built in magnifier to verify a square cut, affords a precise clean cut of fused silica columns. Suitable for use with 0.25 mm ID to 0.53 mm ID tubing, (0.78 mm OD maximum).

List Price : 443.00 EUR

Quick View

36 Degree Air Actuator

N9302827

Actuators is a component of a machine that typically controls movement of a system. The energy created by this movement then gets converted into mechanical motion. This actuator can move 36° using air.

List Price : 550.00 EUR

Quick View

TurboMass Inert Gas Vent Kit

N6470045

This kit contains: gas line assy, Allen key 5/64, hole plug - 0.486 DIA NYL, trap 11.5 LG, restrictor A2 air FID/PHOS, and regulator-9000 H2 ON/OFF.

List Price : 743.00 EUR

Quick View

1/16 in., 6-Port External Sample Injector

N9302814

This external sample injector features 6 ports and has a fitting of 1/16 inches. Maximum temperature of 350°. This switching valve allows employment of different desired mobile phases by periodically injecting into the carrier gas stream of the chromatograph.

List Price : 948.00 EUR

Quick View

0.45 kg, Activated Alumina

09923504

For use in desiccants or an as absorbent. Can be used as a filter of fluoride, arsenic, and selenium in water. Highly porous material excellent for absorbence.

List Price : 168.00 EUR

Quick View

Capillary Injector Starter Kit

N6120101

Kit includes split/splitless injector with programmable pneumatic control for carrier gas, split vent, heater, sensor, and heater block. The AutoSystem XL must be PPC™ ready. If not, a PPC upgrade kit (N6120146) is required. Installation by PerkinElmer Service is required, but not included.

List Price : 855.00 EUR

Quick View

20 mm Screw Top Cap with PTFE/Silicone Septa (1000/pack)

N9304186

Our closures with septa are made in a wide variety of sizes and materials ensuring you have the right combination for your sample type and analysis temperature. Each product is manufactured using strict quality control standards resulting in consistent cap dimensions with septa which may be certified for higher purity grades. All our caps and septa are packed in a clean environment to ensure you receive contaminant free product every time.

List Price : 236.00 EUR

Quick View

TurboMass Gold Tool Kit

N6470040

This kit contains: 0.035 in., 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 5.5 mm, 6 mm Allen keys, metal tweezers, open end wrench 3.2 mm x 4 mm, open end wrench 5.5 mm x 7 mm, and a 6 in. adjustable end wrench.

List Price : 102.00 EUR

Quick View

TurboMatrix HS PC Cable, Software Communication

M0417035

TurboMatrix HS PC Control Software provides full external control of a TurboMatrix headspace sampler from a personal computer running under Windows 95, 98 or NT. Methods and sequences can be generated, stored, edited, printed and executed.

List Price : 119.00 EUR

Quick View

25 mL, Fritted Sparger Kit

N6351021

This 25 mL fritted sparger is recommended for potable water and wastewater samples.

List Price : 137.00 EUR

Quick View

Solenoid Kit 9000 GSV

N6120032

Kit contains: sleeve - hose, valve assy - 9000 GSV, hose fitting - clippard, fitting tube, instructions, fitting- adjustable tee, fitting - adjustable ell, gasket - BUNA N, 1/8 in. OD x 1/16 in. ID urethane hose, #6-32 x 5/16 in. long sems screw.

List Price : 543.00 EUR

Quick View

0.53 mm, 5 m, Fused Silica Tubing Intermediate Polarity

N9301358

This tubing features non-polar deactivation for injection solvents such as alkanesand ethers.

The intermediate polar deactivation is useful for injection solvents such as acetone, dichloromethane, and toluene. The polar deactivation for injection solvents like water. The diameter for this tubing is 0.53 mm and is 5 meters long.

List Price : 141.00 EUR

Quick View

Ultra Inert Splitless Liner, 4 mm, with Wool

09200696

This Ultra Inert Splitless Liner, 4 mm, with Wool features a consistent level of inertness for better sensitivity, accuracy, and reproducibility. Liners with inert wool retain non-volatiles which make trace level analysis easier.

List Price : 500.00 EUR

Quick View

1/8 in., Inert Gas Purifier for Helium

N6471025

The mobile phase in gas chromatography transports analytes through the column, between the injector and detector, when the analytes are not partitioned into the stationary phase. This gas purifier removes hydrocarbons, moisture, and oxygen. Specifically for helium gas.

List Price : 478.00 EUR

Quick View

Open End 7-Piece Wrench Set

N9301325

This 7 piece wrench set consists of: two 1/4 x 5/16 in. wrench, two 3/8 x 7/16 in. wrench, one 7/16 x 1/2 wrench, one 1/2 x 9/16 wrench, and one 9/16 x 5/8 wrench.

List Price : 107.00 EUR

Quick View

NW25 Outlet Mist Vapor Filter

09923518

Mist filters capture oil mist from outlet of pumps; which would otherwise be ejected into the atmosphere. Supplied with NW25 clamp, centering ring, and O-Ring. NW25 to 3/4 inch BSP adapter.

List Price : 1014.00 EUR

Quick View

Cable Kit - Sampler to HP 6890

N6100410

This kit includes two term block plugs, cable assy, and instuctions for easy use. Kit is used with the HP 6890.

List Price : 266.00 EUR

Quick View

Maintenance Kit, GC Capillary Column Cutter (1/pack)

N6107246

Use our capillary column cutting tool to ensure a perfect cut of your GC column, first time, every time. The rotating diamond blade with a built in magnifier to verify a square cut, affords a precise clean cut of fused silica columns. Suitable for use with 0.25 mm ID to 0.53 mm ID tubing, (0.78 mm OD maximum). Contains replacement cutting wheel, O-Rings, and tool to open the cutter.

List Price : 221.00 EUR

Quick View

Split/Splitless Injector Starter Kit for Manual Gas Control

N6550101

Includes: 2 mm ID quartz liner, 4 mm ID quartz liner, silicone O-Rings, green septa (50), 0.4 mm, 0.5 mm and 0.8 mm GV ferrules, gold seal, gold seal nut, capillary injector nut and wafer scribes.

List Price : 1343.00 EUR

Quick View

Ultra Deactivated Split/Splitless Liner, 4 mm, with Wool, Capillary Injector Consumable Kit

09200624

This Ultra Deactivated Split/Splitless Liner, 4 mm, with Wool is part of a GC/MS 590/690 Capillary Injector Consumable Kit (N6550448). The kit includes an autosampler, vial locator, O-rings, liner, ferruls, septa, marathon filament, and aluminum oxide powder.

List Price : 214.00 EUR

Quick View

TurboMatrix Thermal Desorber Air Dryer

N6710048

Single-tube, manual-pneumatics model, upgradeable to the automated version.

Also includes a separate trap-clean-and-test function, which saves time and protects the GC column and detector. Upgradeable.

List Price : 2035.00 EUR

Quick View

TRMTX 600 Transfer Line Kit

N6710173

This kit contains: bushing - snap in 0.875 ID 1.21, MACH SCRE M4 x 12 PAND HD SEMS, nut M4 x 4.06 HGT, instructions, clamp wiring - nylon, bracket assy-501 transfer line, and cover-501 rear transfer line.

List Price : 417.00 EUR

Quick View

8 oz., Snoop Liquid Leak Detector

N9301329

For use with volumetric bubble flowmeters. Also useful for checking gas delivery system plumbing for leaks. Not recommend for use upstream of capillary GC systems (an electronic leak detector is preferred).

List Price : 19.00 EUR

Quick View

Gas Sampling Valve Starter Kit

N9302821

Kit contains: 1/16-1/8 in. column adapter, 6 in. x 1/16 in. x 0.02 in. jumper, 10 in. x 1/16 in. x 0.02 in. jumper, 16 in. x 1/16 in. x 0.02 in. injector carrier, 20 in. x 1/16 in. x 0.02 in. detector carrier, 50 in. x 1/16 in. x 0.02 in. sample I/O, Injector/Detector adaper, 1/16 in. nut, 1/16 in. ferrule, element filter union removable, and a replacement screen.

List Price : 1319.00 EUR

Quick View

Headspace 100 Starter Kit

N6710197

This kit contains: PTFE Butyl septa/cap/spring, PTFE-coated silicone rubber SE, aluminum silicone septa/cap/spring, o-ring, seal assy-HS40 needle, 20 mm hand crimper, 22 mL screw cap headspace vials (100/pack), 18 mm butyl/PTFE screw caps (100/pack), 18 mm silicone/PTFE screw caps (100/pack), 22 mL crimp cap headspace vials (100/pack).

List Price : 1574.00 EUR

Quick View

0.5 mm, Graphite Ferrule I.D., 0.18 to 0.32 mm column (10/pack)

09200785

This is the ferrule of choice for high-temperature applications. Of the three ferrule types available, graphite is the softest which makes it less damaging to capillary columns when over tightened. Graphite seals easily and does not stick to glass columns. This product is recommended for use with capillary columns. Temperature limit is 450 °C.

List Price : 107.00 EUR

Quick View

Clarus SQ 8 GC/MS

N6480012 , N6480014 , N6480013

Our Clarus^® SQ 8 GC/MS offers unsurpassed sensitivity and unparalleled stability for identification and quantitation of volatile and semi-volatile compounds (VOC and SVOC). It's designed to deliver high throughput, rugged dependability, and great results. Plus, with our patented SMARTsource^™ (for both EI and CI), maintenance is easy.

Gas Chromatography Mass Spectrometry (GC/MS)

Product Type

Product Brand Name

Length

Maximum Temperature (Celsius)

Minimum Temperature (Celsius)

Pipetting Arms

Product Group

Technology